EnglishFinnishArabicDutchGerman



Pioneer Pollution Control & Air Systems Pvt. Ltd.

Centrifugal Blowers


Centrifugal Blowers

We provide our clients with the best Centrifugal Blowers. These Centrifugal Blowers are extensively used for building-cooling. Our Centrifugal Blowers are energy efficient, high volumetric and have optimum pressure. Optimum pressure is the pressure needed to overcome pressure drops in air washer, filter and GI duct.


Room pressure :
  • 3 to 5 mm WG
  • Low RPM, large diameter of impeller and more no. of blades with large area are preferred
 
As Per The Client Needs
  • High temperature up to 800oC operations, generally used for annealing furnace
  • High Pressure Blowers up to 3000 mm of WC
  • Building cooling Blowers at optimum pressure and high volume of cooling air

Benefits :
  • Prevents Leakages from door openings cable entries
  • Energy consumption is little due to low R.P.M. and optimum pressure

Casings :
  • Made from high quality HR/CR sheet (thick gauge) double inlet-descaled, Epoxy primer coated, degreased and Epoxy paint to defend from moisture

Impeller :
  • Double width (Blades on both the side of the centre plate)
  • Backward curve limit load characteristics
  • Degreased
  • Descaled Epoxy primer coated
  • Epoxy paint
  • Statically
  • Dynamically balanced

Shaft :
  • EN8 on the whole machined and grinding

Bearings :
  • Heavy duty self aligning 223
  • K series FAG or SKF types adopter sleeves
  • Usage of heavy duty cast iron plumber blocks

Drive :
  • V-belt Drive
  • Statically and dynamically balanced pulleys
  • Large blowers Flat belts and Flat pulleys provided to save energy